Copper(I) trifluoromethanesulfonate toluene complex

Copper(I) trifluoromethanesulfonate toluene complex - Names and Identifiers

Name	Copper(I) trifluoromethanesulfonate toluene complex (2:1)
Synonyms	Dicopper ditriflate toluene Cuproustriflatetoluenecomplex COPPER(I) TRIFLATE TOLUENE COMPLEX Cuprous Trifluoromethanesulfonate Toluene Complex CUPROUS TRIFLUOROMETHANESULFONATE TOLUENE COMPLEX COPPER(I) TRIFLUOROMETHANESULFONATE TOLUENE COMPLEX TRIFLUOROMETHANESULFONIC ACID COPPER(I) SALT TOLUENE COMPLEX
CAS	48209-28-5
EINECS	629-025-0
InChI	InChI=1/C7H8.2CHF3O3S.2Cu/c1-7-5-3-2-4-6-7;22-1(3,4)8(5,6)7;;/h2-6H,1H3;2(H,5,6,7);;/q;;;2*+1/p-2

Copper(I) trifluoromethanesulfonate toluene complex - Physico-chemical Properties

Molecular Formula	C9H5Cu2F6O6S2
Molar Mass	514.34
Melting Point	180°C (dec.)
Boling Point	162°C at 760 mmHg
Flash Point	76°C
Solubility	Soluble in toluene.
Vapor Presure	1.14mmHg at 25°C
Storage Condition	Keep in dark place,Inert atmosphere,Room temperature
Sensitive	Hygroscopic

Copper(I) trifluoromethanesulfonate toluene complex - Risk and Safety

Risk Codes	R11 - Highly Flammable R36/37/38 - Irritating to eyes, respiratory system and skin.
Safety Description	S16 - Keep away from sources of ignition. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing.
UN IDs	UN 1325 4.1/PG 2
WGK Germany	3
FLUKA BRAND F CODES	10-21-23
HS Code	29049090
Hazard Class	4.1
Packing Group	III

Copper(I) trifluoromethanesulfonate toluene complex - Introduction

Copper(I) trifluoromethanesulfonate complex (Copper(I) trifluoromethanesulfonate toluene complex) is an organocopper compound. Its chemical formula is [Cu (CFL_3 SOL_3) ₂]• (CFL_3 CH_3) ₂.

The nature of this consortium is as follows:
1. Appearance: colorless crystal or white solid.
2. Melting point: about 220-230°C.
3. solubility: soluble in organic solvents, such as toluene, ethanol and carbon disulfide.

The main uses of this compound include:
1. Catalyst: Copper (I) trifluoromethanesulfonate toluene complex is widely used as a catalyst in organic synthesis reactions, such as palladium-catalyzed olefin chlorination reaction, benzene metalation reaction and C- C bond formation reaction.
2. Electronic material: It can also be used as a raw material for photoelectric conversion devices in organic electronic materials.

The compound can be prepared by the following methods:
Copper(I) trifluoromethanesulfonate (Copper(I) trifluoromethanesulfonate) and toluene were mixed and purified by crystallization after the reaction.

Relevant safety regulations need to be observed when handling the compound. In general, compounds should be stored in a dry, well-ventilated place, away from fire and oxidizing agents. During use, it is necessary to wear appropriate personal protective equipment, such as chemical goggles and protective gloves, to avoid contact with skin. In the case of accidental contact or ingestion, seek medical help immediately and provide relevant compound information.

Last Update：2024-04-10 22:29:15